Data Loggers

Tpaq21

Compact, highly sophisticated and accurate, this logger records 130,000 data readings over 10 selectable channels.

Variable sampling intervals and multiple event programming provides detailed analysis where heat treatment processes are followed by fast moving sections of the product temperature profile, such as gas or water quenches.

Combined with a built-in transmitter to see these processes in real
time, this is an ideal data logger for all applications.

Highlights:

  • Ten thermocouple channels for maximum data collection on each run.
  • Huge memory capacity: 130,000 data points for detailed process analysis.
  • Sampling intervals down to 0.1 seconds to collect maximum data in minimum time.
  • High accuracy: to +/- 0.3°C / 0.5°F for compliance to tight specifications.
  • Hot data protected by non-volatile memory or software warning if reset is attempted before download.
  • USB & RS232 communication for rapid data download to laptops.
  • Radio Frequency (RF) telemetry or hard wired data acquisition for monitoring in real time with full analysis functions and alarms to alert if the process is out of specification.
  • Four status LED's to show the exact logger activity after disconnecting from the computer.
  • Push start/stop buttons for easy user control.
  • Two battery types for operation in normal and high ambient temperatures.
  • Rugged industrial case and electronics allows operation in harsh furnace and kiln environments of dust, pressure, and vacuum.
  • 'Multiple events' allows sampling interval change during the run, ideal for water and gas quench processes.
  • Reset by start button after download for speed and simplicity.

Specifications for specific thermocouple types
Type
K
N
R
S
B
J
Measuring range
-100°C* – 1370°C
-148°F – 2498°F
-100°C* – 1300°C
-148°F – 2372°F
-0°C – 1760°C
-32°F – 3200°F
-0°C – 1760°C
-32°F – 3200°F
55°C – 1815°C
131°F – 3300°F
0°C – 800°C
32°F – 1472°F
Accuracy
± 0.3°C** / 0.5°F
± 0.4°C** / 0.7°F
±1.0°C at 200°C
±1.8°F at 392°F

±0.7°C at 1000°C
±1.3°F at 1832°F
±1.0°C at 200°C
±1.8°F at 392°F

±0.8°C at 1000°C
±1.4°F at 1832°F

±3°C at 400°C
±5.4°F at 752°F

±1.0°C at 1500°C
±1.8°F at 2732°F
±0.2°C /± 0.4°F
Resolution
0.1°C / 0.2°F
0.1°C / 0.2°F
0.1°C / 0.2°F
0.1°C / 0.2°F
0.1°C / 0.2°F
0.1°C / 0.2°F

*'Using sampling interval >0.8 seconds over range shown
**Contact Datapaq for accuracy at -100°C to -190°C


Specifications for specific logger types
Normal operating temperature High operating temperature
Model number* TP2086 TP2016 TP2186 TP2116
No. of channels 8 10 8 10
Memory (data points) 130,000 130,000 130,000 130,000
Max. operating temp. 70°C / 158°F 70°C / 158°F 110°C / 230°F 110°C / 230°F
Battery type NiMH rechargeable NiMH rechargeable VHT Lithium VHT Lithium
Max. battery life between charges** 340 hours 340 hours 250 hours 250 hours
Sampling interval:        
No telemetry
 0.1 sec – 50 mins 0.1 sec – 50 mins 0.1 sec – 50 mins 0.1 sec – 50 mins
Hardwired telemetry
 1 sec – 50 mins 1 sec – 50 mins 1 sec – 50 mins 1 sec – 50 mins
RF telemetry
 n/a 2 secs – 50 mins n/a 3 secs – 50 mins
Max. operating pressure at 20°C / 68°F 20 bar / 290 psi 20 bar / 290 psi 20 bar / 290 psi 20 bar / 290 psi
Min. operating pressure at 20°C / 68°F 10-5millibar 10-5millibar 10-5millibar 10-5millibar
* Model number shown is for type K thermocouples only, other types have different model numbers
** Max. battery life depends on sampling interval, operating temperature and use of RF telemetry

  Case size (all logger types)
  Length 200 mm / 7.87"
  Width 98 mm / 3.86"
  Height 20 mm / 0.79"
   
  General operating specifications
  Logger start by: Manual (button), Temperature (rising or falling), or Time
  Programmable events: Up to 8 sampling interval changes possible per run, trigger by rising or falling temperature after first event
  Hot data protection: By non-volatile memory, and software warning if reset attempted before download
  Communication: Via USB or RS 232 for lap top computers
  Logger reset: Possible after download by start button (uses same run parameters)

 

 

Q18

The Q18 data logger has been designed using the latest miniaturised electronic packaging technology, enabling us to combine speed of readings, superb accuracy and high resolution all in one versatile unit.

  • Status indicators and stop/start buttons

  • Fast sampling capability and large memory

  • Available in two height and width options, each of which has a range of thermal barriers

  • Equipped with an internal NiMH battery and intelligent fast charger circuits allowing the user to leave the logger permanently on charge with no risk of damage to the battery

  • Start/stop buttons, time or temperature trigger allowing greater user control

 
Specifications
Click for larger image
Click for larger image
Model
DQ1860
DQ1862
Height
12mm / 0.5"
20mm / 0.8"
Width
106mm / 4.2”
57mm / 2.24”
Length
150mm / 5.9”
165mm / 6.5”
Number of Channels
6
Thermocouple Type
Type K
Sampling Interval
0.05 seconds to 10 minutes
Accuracy
±0.5°C / 1°F
Resolution
0.1°C / 0.2°F
Maximum Internal
Operating Temperature
85°C / 185°F
Temperature Range
-200°C to 1,370°C / -328°F to 2498°F
Memory
18,000 readings per channel
 

XDL12

The new Datapaq external data logging solution to furnace surveying

Datapaq’s XDL12 data logging system provides the complete solution for temperature uniformity surveying in batch and vacuum furnaces where data collection, external to the furnace is desirable.

Combine the XDL12, a rugged, accurate and easy to use data logger, with Datapaq’s powerful and proven Insight Survey analysis software, to ensure that temperature uniformity surveys to AMS2750D standard are achieved quickly and accurately.


Features & Benefits:

  • Choose the thermocouple types required for your application and Datapaq will pre-configure all 12 channels to meet your exact needs.
  • Thermocouple sockets are color coded to IEEE specification, eliminating mistakes with setup and saving technicians valuable time.
  • Accepts standard thermocouple plugs to give a positive and reliable connection (no screw connections), reducing the risk of survey failures and expensive furnace downtime.
  • Accurate and reliable, the XDL12 meets, or exceeds,AMS2750D & CQI-9 specification requirements for field test instruments.
  • Quality build guaranteed. The XDL12’s robust casing is constructed of high grade Stainless Steel and is completely sealed from dust to IP50 specification.
  • With a rechargeable battery for up to 60 hours of use, there is no need to rely on a mains power input.
  • Fully portable. Set up the XDL12 wherever it is most convenient for you.
  • Fitting the optional laptop stand means the XDL12 takes up little workspace area
  • The ‘start/stop’ button operation ensures ease of use. All other operations are via the PC, using Datapaq’s Insight Survey analysis software.
  • Data accuracy guaranteed. The XDL12 is fully protected from ‘earth loops’ or other interference.
  • Clear, easy to read LED’s show logger status at all times.
Specifications for specific thermocouple types
Type K N R S J T
Measuring Range -100 to 1370 °C
-148 to 2498 °F		 -100 to 1300 °C
-148 to 2372 °F 		50 to 1760 °C
122 to 3200 °F 		50 to 1760 °C
122 to 3200 °F 		0 to 800 °C
32 to 1472 °F 		-100 to 400 °C
-148 to 752 °F
Accuracy ± 0.3°C ± 0.4°C ± 1.1°C ± 1.1°C ± 0.3°C ± 0.3°C
  ± 0.5°F ± 0.7°F ± 2.0°F ± 2.0°F ± 0.5°F ± 0.5°F
Resolution 0.1°C 0.1°C 0.1°C 0.1°C 0.1°C 0.1°C
  0.2 °F 0.2 °F 0.2 °F 0.2 °F 0.2 °F 0.2 °F


External Logger Specification
Part number: XD0012
Number of channels: 12 channels, sockets will accept standard thermocouple plugs
LED’s: 2 x battery (low and charging) 2 x status
Thermocouple combinations: Combination of 3 types
Examples:

10 type N + 2 type S,
9 type K + 3 type R, etc.
Specify at time of ordering
Maximum operating temperature range:

0 to 55°C / 32 to 131 °F
Humidity operating range:

0 to 85% RH non-condensing
Battery type:

NiMH Re-chargeable
Battery life:

60 hours
Power input:

12V DC from universal 100/230V AC
Communication:

Via USB
Sampling interval range:

1 second to 50 minutes
Case size: Height (without computer rest) = 60mm / 2.36 “
  Height (with computer rest) = 80mm / 3.14 “
  Width (overall) = 330mm / 12.99 “
  Depth (including handle) = 340mm / 13.39 “
Weight: 6.5kg / 14.33 lbs
Case IP rating: IP50
Logger start: Manual (start button);Time; Temperature
Trigger (rise/fall on any thermocouple)
Insight software: v6.0 and above
Hot data protection: Non-volatile memory or software warning if reset attempted before download
Telemetry: Hardwired only




 

Interconnecting leads

Interconnecting leads connect between the plug on the vacuum furnace and the data logger. Leads are available in all types of thermocouples.

     
 

CS1201/X* Interconnecting Lead Miniature socket
to standard plug

CS1200/X* Interconnecting Lead Standard socket
to standard plug.

X* - Letter Denoting the Cable type
K – Type K (Green Cable)
N – Type N (Pink Cable)
R & S – Type R or S (White Cable)